-
Usage
Properly prepared interior walls, trim and ceilings of previously painted or bare drywall, plaster, masonry, wood and primed metal
-
Prep
Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Scrape and sand peeled or damagedpaint. Sand glossy surfaces dull.
-
Application
Stir paint thoroughly. Intermix containers for uniformity. Apply product when surface, air and product temperatures are between 50-90°F. Apply with a premium-quality brush, a synthetic roller cover or airless spray (2000 PSI, .015"-.019" tip). Thinning not required. Paint the ceiling first, then walls and trim. For roller application, cover approximately a 2' x 2' area using an “N” pattern. Finish with light roller strokes in one direction. Some deep or bright colors, surface conditions and application techniques may impact coverage and require multiple coats to achieve your optimal coverage.
-
Dry Time
Dry Time @ 77 °F and 50 % Relative Humidity
To The Touch: 1 hour - 4 hour
Recoat: 2 hour - 4 hour
-
Clean-up & Disposal
Clean up with warm, soapy water.
